NSW Residential Envelope Guide
Airtightness can influence real-world comfort and energy use, but its relationship with BASIX is more specific than simply describing a home as sealed or draught-free.
Uncontrolled air leakage can allow conditioned air to escape and external air to enter through gaps, penetrations and construction junctions. This can create draughts, reduce temperature stability and weaken the practical benefit of insulation and efficient heating or cooling systems.
Within a BASIX thermal comfort assessment using NatHERS software, air movement is represented through standardised modelling assumptions and inputs for relevant openings and penetrations. The assessment does not ordinarily measure the completed home’s actual whole-building leakage rate.
This guide explains that distinction. For the wider BASIX targets, documentation and NSW submission pathway, visit the BASIX Knowledge Hub.
In Brief
Modelled Air Movement
NatHERS software incorporates assumptions for infiltration and airflow when estimating heating and cooling demand.
Relevant Penetrations
Sealed and unsealed downlights, exhaust fans, vents, flues and other openings may affect the modelled thermal response.
As-Built Performance
A design-stage BASIX assessment does not by itself confirm the actual airtightness achieved by the completed building.
Airtightness is therefore both a modelling consideration and a construction-quality issue. The design can limit obvious leakage paths, but continuity must ultimately be delivered on site.
Envelope Performance
Airtightness describes how effectively the external building envelope limits unintended air movement through gaps, cracks and penetrations.
The relevant envelope generally includes the walls, floors, ceilings, roofs, windows and doors separating conditioned areas from external air, unconditioned spaces or ventilated roof and subfloor areas.
Uncontrolled leakage may occur through:
Airtightness does not mean eliminating all ventilation. It means separating deliberate ventilation from random leakage through the construction.
Thermal Comfort Assessment
A standard design-stage BASIX assessment does not physically test the completed dwelling for air leakage. Where NatHERS thermal modelling is used, the software estimates heating and cooling demand using standardised assumptions for building operation, infiltration and airflow.
Assessors also model relevant features shown in the proposed design. Depending on the project and software inputs, these may include:
These inputs influence the model, but they are not the same as measuring a complete dwelling under pressure after construction.
BASIX should therefore be understood as a design and compliance assessment. It cannot, by itself, certify that every junction and penetration has been sealed correctly on site.
Performance Gap
A thermal model is based on the documented building design and the standardised rules of the assessment method. The completed home is affected by how materials, membranes, windows, doors and services are actually installed.
The assessment reads documents. The model reflects the proposed construction, openings and penetrations that are shown or specified.
The builder delivers the junctions. Practical airtightness depends on continuity around floors, walls, roofs, doors, windows and services.
Substitutions can change the outcome. Different fans, downlights, doors or construction systems may introduce leakage paths not represented in the original design.
Testing verifies the built result. A blower-door test can measure whole-building leakage after the envelope has been constructed.
Construction Coordination
Openings
Leakage can occur through opening seals, frame junctions and gaps between installed frames and surrounding construction.
Ceiling Plane
Unsealed fittings can create direct paths between conditioned rooms and ventilated roof spaces.
Services
Plumbing, electrical, refrigeration and mechanical services may repeatedly penetrate the intended air-control layer.
Building Junctions
Changes in construction system can interrupt envelope continuity where no clear sealing strategy has been detailed.
Combustion Features
Open flues, chimneys and associated penetrations may create significant air paths when they are not appropriately controlled.
Internal Interfaces
Doors and construction junctions adjoining garages, subfloors and roof spaces can affect both comfort and environmental separation.
Thermal Envelope
Insulation and airtightness control different forms of heat movement. Insulation reduces heat transfer through the building materials. Airtightness limits heat carried by unintended air movement through gaps and openings.
A ceiling may contain high levels of bulk insulation, but an unsealed exhaust fan or numerous ceiling penetrations can still connect the room to a ventilated roof space. Similarly, an insulated wall can remain draughty where the window installation or service penetrations are incomplete.
Insulation continuity can also be affected by penetrations. Clearances, displaced batts and poorly coordinated services may reduce the effective insulation coverage while simultaneously creating additional leakage paths.
Strong envelope performance therefore depends on both thermal resistance and construction continuity rather than a nominal insulation value alone.
Air Movement
No. Airtightness and ventilation perform different functions.
Airtightness limits uncontrolled air movement through the building fabric. Ventilation provides intentional air exchange through operable windows, doors, exhaust systems or purpose-designed mechanical systems.
A residential design can therefore include:
The objective is not to prevent occupants from opening the building. It is to avoid relying on unpredictable construction leakage as the home’s ventilation strategy.
Design and Documentation
A practical airtightness strategy should identify which material or construction layer controls air movement around the complete conditioned enclosure.
Depending on the construction system, this role may be performed by internal linings, membranes, rigid sheathing, sealed concrete elements or a coordinated combination of materials. The important issue is continuity rather than the product name alone.
The control layer should be traceable through:
The external wall system. Seams, corners, window openings and material transitions need a continuous connection.
The ceiling or roof plane. The selected air-control line should remain clear through bulkheads, raked ceilings and roof transitions.
The ground or suspended floor. Junctions between floors and walls should not leave an undefined open edge.
Every required penetration. Pipes, cables, ducts, fans and structural elements need compatible sealing details.
As-Built Verification
A blower-door test is not ordinarily a standard requirement for every BASIX project.
The test temporarily installs a calibrated fan in an external doorway and creates a controlled pressure difference across the building envelope. Measuring the airflow needed to maintain that pressure allows the tester to calculate the amount of leakage through the enclosure.
Testing can be useful where:
Where testing is planned, an interim test before all finishes are complete can provide an opportunity to locate and seal leakage paths while they remain accessible.
Moisture Behaviour
Moving air can carry water vapour through gaps in the building envelope. Where moisture-laden air reaches a sufficiently cold surface within a wall, ceiling or roof assembly, condensation may occur.
Reducing uncontrolled leakage can help limit this form of moisture transport, but airtightness cannot be considered independently of ventilation, vapour control, material selection, climate and assembly design.
A tighter building also makes the intentional management of internally generated moisture more important. Bathrooms, kitchens, laundries and occupant activities continue to release water vapour that must be removed through suitable ventilation.
A BASIX thermal comfort result is not a project-specific condensation or hygrothermal analysis. More complex wall and roof systems may require separate technical review.
Practical Refinement
Identify which spaces are conditioned and trace a continuous air-control line around them in plan and section.
Coordinate lighting and services so the principal ceiling, wall or floor control layer is not repeatedly interrupted.
Use appropriately sealed downlights, exhaust systems and dampers where these penetrate the conditioned enclosure.
Coordinate seals around operable elements as well as the junction between the frame and surrounding wall construction.
A dedicated service cavity can allow wiring and fittings to be installed without repeatedly penetrating the primary control layer.
Construction inspections and optional blower-door testing can identify gaps that are not visible in the design documentation alone.
Delivery Risks
Airtightness problems commonly arise where the project relies on general intentions rather than a coordinated envelope strategy.
These issues are usually easier to resolve during documentation and envelope construction than after internal linings and finishes have concealed the junctions.
Technical Boundary
A BASIX thermal assessment does not replace the building-sealing, ventilation, condensation-management, waterproofing or fire-safety requirements applying to the completed building.
It also does not establish:
These matters may require detailed architectural documentation, mechanical design, specialist building-envelope advice, site inspection or post-construction testing.
Frequently Asked Questions
No. BASIX does not provide a separate airtightness target comparable to its water, energy or thermal comfort requirements. Air leakage is relevant through the assumptions and building inputs used in thermal modelling.
Does BASIX require a blower-door test?Not ordinarily. A blower-door test may be commissioned for performance verification or required by another project pathway, specification or contractual commitment, but it is not a standard requirement for every BASIX assessment.
Does NatHERS account for air leakage?NatHERS software uses standardised assumptions for infiltration and airflow and includes inputs for recognised penetrations and openings. This is not the same as measuring the completed home’s actual whole-building leakage rate.
Can airtightness improve a BASIX thermal result?Relevant modelled features, including sealed penetrations, can affect heating and cooling calculations. However, a general statement that the proposed home will be airtight cannot be treated as an unlimited modelling improvement without inputs supported by the applicable assessment method.
Does insulation make a home airtight?No. Insulation reduces heat transfer through building elements, while airtightness controls unintended air movement through gaps and penetrations. The two functions should be coordinated but are not interchangeable.
Is an airtight home unhealthy?Airtightness itself is not a substitute for ventilation. A well-performing home should limit uncontrolled leakage while still providing suitable intentional ventilation through windows, exhaust systems or designed mechanical ventilation.
Does BASIX assess condensation risk?A BASIX thermal comfort assessment is not a detailed condensation or hygrothermal analysis. Projects with complex envelope assemblies may require separate review of vapour control, ventilation, material layers and climate exposure.
Related Guidance
BASIX Project Review
Certified Energy can review the available plans, thermal specifications, ceiling penetrations, glazing and construction systems as part of the BASIX thermal comfort assessment.
Send Your Project Documents